Malaysia Electrical Imports: ST CoA and SIRIM Label Checks
Key Points
- From 5 November, EMC immunity is mandatory for communications and connected equipment in Malaysia. Existing certificates can no longer use the normal renewal route.
- The ordinary appliance line is tightening at the same time: an ST Certificate of Approval, consignment testing after clearance, and the ST-SIRIM safety label are all required.
- For air-conditioning and refrigeration parts, small appliances and motor-driven products with control boards, check the applicant entity and the plug type before discussing price.
Policy Changes This Week
No new legal text was published this week. What matters are two requirements already in force.
1. EMC immunity applies from 5 November
The Malaysian Communications and Multimedia Commission (MCMC) issued announcement SQASI/CMCS/1/26/011 on 13 October, together with technical code MCMC MTSFB TC T022:2026 for communications equipment. EMC now covers both emission and immunity. From 5 November 2026, equipment inside the EMC scope of T022:2026 must be assessed for immunity, which was previously optional. New applications need emission and immunity results, from a SIRIM laboratory or an accredited external laboratory. Holders of existing approvals cannot follow the standard renewal procedure; they must file a Parallel by Comparison (PBC) application, which reviews immunity only. Where the old report has no immunity data, the device has to be tested again.
2. Three gates on appliance imports are checked together
Electrical equipment regulated by the Energy Commission (Suruhanjaya Tenaga, ST) needs an ST Certificate of Approval (CoA) before import, and the applicant must be a company registered with the Companies Commission of Malaysia (SSM). After customs clearance the consignment goes through consignment testing, and the ST-SIRIM safety label must be affixed to the product itself before distribution. A CoA and a label are not interchangeable, and a certification mark printed on the outer carton does not count. Plugs are a frequent failure point: a 13A fused plug must meet MS 589-1 or BS 1363-1, while 15A plugs and two-pin plugs for certain Class II appliances follow separate rules. Check by product type instead of shipping the version sold elsewhere.
Impact on Your Export Business
Cost. Certification and testing are one-off items, but they multiply with every model. Immunity testing, consignment testing, label printing and the local importer’s service fee all land in the landed cost. A flat FOB quote is easily eaten by charges added at clearance.
Lead time. PBC applications and re-testing need queue time. An old report without immunity data means a full test cycle, and starting after the order is confirmed is usually too late. Goods already at port with the wrong label or a mismatched CoA attract daily storage and demurrage.
Clearance. The Royal Malaysian Customs Department (RMCD / Kastam), ST and SIRIM compare data. A mismatch between the declared model, the certified model and the actual goods is the most common reason for a hold. In October a consignment of household appliances without ST CoA and SIRIM certification was seized, which shows the port check is not a formality.
Certification. Chinese CCC or European CE marks do not automatically satisfy Malaysian requirements; some standards carry national deviations. Plugs, voltage marking and Malay labelling cause more trouble than the machine test itself.
For smaller exporters: share one test report across a model family built on the same circuit platform, let the Malaysian importer of record or a compliance service provider handle the CoA and consignment testing, and write down who pays. Air-conditioning and refrigeration parts in our Machinery category, and small appliances in Electronics, are the two groups to align first.
Market Watch
Demand. Stocking for year-end promotions and the period before the monsoon is still running. Enquiries for air conditioners, fans and dehumidifiers are more active than last month, while cooling parts and pumps tied to data centre and factory projects hold steady. Consumer electronics remain replacement-cycle driven, with many small accessory orders and fast repeats. The ringgit (MYR) has moved enough to affect quotes, so long-lead orders need a currency clause.
Access. Enforcement keeps getting stricter, and label, plug and certificate-model consistency are the focus of inspections. Our read: air-conditioning and refrigeration plus small appliances are worth pursuing, but only after the CoA and label route is clear. Unbranded small appliances with no local importer behind them are better paused.
Actions for the Next 30 Days
- Check each product against the ST regulated list by AHTN/HS code and confirm whether a CoA is required.
- Pull the old EMC report and look for an immunity section. If it is missing, book the test now rather than after the order.
- Confirm who holds the current certificate. If it is the overseas factory, agree with the local importer on a PBC or a fresh application before shipment.
- Verify plug type and nameplate: 13A fused plug to MS 589-1 / BS 1363-1, with model, voltage and Malay labelling corrected in one pass.
- Separate SST, testing, label and forwarder charges in the quotation, and state who bears each under FOB, CIF and DDP.
- Track inspection and yard congestion at Port Klang and Penang; move urgent orders by air or LCL rather than betting on one vessel.
Feel free to contact us to check a specific model and destination port.
Disclaimer & Reminder
Tax rates, certificate names and effective dates mentioned here are subject to the latest official announcements of Malaysia. This article is compiled from public announcements and does not constitute legal or customs advice.